Are you looking for the best CO2 tanks to keep your beer fresh and bubbly? If so, you're in the right place. China is home to several top-notch manufacturers of beer CO2 tanks, each offering unique features and benefits. Let's dive into a comparison of the leading factories to help you make the perfect choice for your brewing needs.

CO2 in China...

Product Details: China has implemented the world's largest emissions trading system to reduce national greenhouse gas emissions. The system, a tradable performance standard (TPS), assigns firms emissions allowances based on their emissions intensity. The program is phased, starting with the electricity sector in 2020, expanding to include aluminum, cement, and iron and steel sectors, and further expanding to all emissions-intensive industries by 2026.

Pros:
- The TPS is expected to contribute significantly to China’s goal of achieving net...
- Projected emissions reductions under the TPS could decrease by about 20 percent...
- The program could prevent 2.3 million–2.5 million premature deaths from 2020 to...
- The environmental and health benefits of the TPS are estimated to be 19 trillion...

Cons:
- China’s CO2 emissions increased by 5.2% in 2023, requiring a record fall of 4-6%...
- The current growth in emissions, driven by coal-fired power and oil consumption,...
- Frequent modifications to energy statistics have led to uncertainty in achieving...

KegLand 2.5 lb CO2 Tank | Premium Aluminum | New

Product Details: The 25 lb Aluminum CO2 Tank is constructed from high-strength aluminum alloy 6061-T6, making it lighter and rust-proof compared to steel tanks. It measures approximately 8 inches in diameter and around 30-31 inches in height with the handle. The tank is equipped with a CGA320 valve, which is CGA approved and has a male thread for CO2 regulators. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. The tank is stamped with required U.S. Department of Transportation and Transport Canada markings. Once filled, it can dispense around 25-30 beer kegs.

Pros:
- Lightweight and rust-proof due to high-strength aluminum alloy 6061-T6 construct...
- Equipped with a CGA320 valve, CGA approved and compatible with CO2 regulators
- Higher capacity allows for longer use without refills, dispensing 25-30 beer keg...
- Includes an easy-carry handle for convenient transport
- Complies with U.S. Department of Transportation and Transport Canada markings

Cons:
- Ships empty due to Federal regulations, requiring local filling
- May require periodic inspections and maintenance to ensure safety and compliance
- Contains brass components which may include trace amounts of lead, a known healt...

Boxing Cat Brewery succeeded in lowering DO levels ...

Product Details: Boxing Cat Brewery implemented the Haffmans CO2/O2 Gehaltemeter from Pentair to improve their brewing process. The system helps in measuring and controlling CO2 and O2 levels, which is crucial for maintaining beer quality. The brewery started a pilot trial with Pentair in 2015 to address the issue of high dissolved oxygen (DO) levels in their beer.

Pros:
- Substantially lowered DO levels, improving beer quality and stability.
- Balanced growth and quality, enabling the brewery to produce the best beer possi...
- Enhanced control over CO2 and O2 levels, which is vital for brewing.

Cons:
- No specific cons mentioned in the case study, but the initial need for a pilot t...

Beer in my CO2 tank

Product Details: CO2 tanks come in various sizes ranging from 2.5 lb to 20 lbs, commonly made from aluminum or steel. Key considerations include portability, efficiency, and space. The tanks are filled to only 34% of their volume to prevent safety issues at high temperatures. The pressure in the tank increases with temperature, requiring proper storage and a good CO2 regulator.

Pros:
- Larger tanks require less frequent refilling, making them more convenient for he...
- Properly sized tanks can fit inside most kegerators, ensuring efficient beer car...
- Using a CO2 tank allows for precise control over carbonation levels, preventing...

Cons:
- CO2 tanks can be heavy and bulky, especially larger sizes.
- There is a risk of the tank overheating and triggering the safety valve, which c...
- Proper handling and storage are crucial to avoid accidents and ensure the tank f...

China Hot Sales Beer Kegerator Two Stage CO2 ...

Product Details: This China Hot Sales Beer Kegerator features a two-stage CO2 beer regulator. It is designed to hold up to two 1/2 keg barrels, making it suitable for bars, cafes, and special events. The unit has a durable exterior, often made of black coated steel or vinyl, and a stainless steel interior for ease of cleaning. It includes a digital thermostat, a balanced beer refrigeration system, and commercial-grade casters for mobility. The kegerator also comes with a drip tray, a door with a key lock, and knockout plugs for external CO2 lines.

Pros:
- Accommodates up to two 1/2 keg barrels, allowing for multiple beer options.
- Durable and easy-to-clean stainless steel interior.
- Digital thermostat and balanced refrigeration system for consistent temperature.
- Commercial-grade casters for easy mobility.
- Energy-efficient R290 refrigerant with low ozone depletion potential.
- Includes drip tray and door with key lock for security and ease of cleaning.

Cons:
- Tower and tapping equipment may not be included and need to be ordered separatel...
- Requires a 115V electrical connection for operation.
- May have limited interior space if not optimized with side-mounted evaporator.
- Warranty terms may vary depending on the purchase date.

Co2 Canister For Beer

Product Details: Aluminum CO2 cylinders are designed for the beverage carbonation industry, made from high-strength alloy aluminum 6061-T6. They are manufactured to US DOT-3AL and TC-3ALM specifications. Capacities range from 1.5 lb to 50 lb. These cylinders feature a brushed aluminum exterior finish, buffed shoulders, and large-sized stamping for easy identification. They come with CGA 320 CO2 valves and are lightweight, sturdy, and corrosion-resistant. Larger cylinders (10 lb, 20 lb, and 50 lb) include heavy-duty, reinforced nylon carrying handles for easy transportation.

Pros:
- Lightweight and corrosion-resistant
- Durable and made from high-strength alloy aluminum 6061-T6
- Compliant with US DOT-3AL and TC-3ALM specifications
- Available in various capacities to suit different needs
- Equipped with CGA 320 CO2 valves
- Feature heavy-duty carrying handles for larger sizes

Cons:
- Higher upfront cost for brand new tanks
- Refill frequency can be high for smaller tank sizes
- Larger tanks can be cumbersome to handle and store
- Require regular inspections and maintenance to ensure safety

China Co2 Bottles Factory and Manufacturers, Suppliers

Product Details: ZX DOT aluminum CO2 cylinders are designed and produced to meet or exceed DOT-3AL standards. They are made from aluminum alloy 6061-T6, with material quality ensured by a spectrum analyzer. The cylinders are available in various sizes, including DOT-B1, DOT-B1.5, DOT-B1.8, DOT-B2, DOT-B2.5, DOT-B5, DOT-B10, DOT-B15, DOT-B20, DOT-B22, and DOT-B35. Custom sizes are also available within the certified range. The cylinders have a service pressure of 1800 PSI and a test pressure of 3000 PSI. They are equipped with either 1.125-12 UNF or 0.75-16 UNF threads depending on the diameter. The surface finish can be customized with options like polishing,

body painting, and crown painting. Food-grade cleaning is performed using ultrasonic cleaners and pure water at 70 degrees Celsius.

Pros:
- Compliant with international standards such as DOT-3AL, ISO 9809-1, ISO 11118, a...
- Made from high-quality aluminum alloy 6061-T6
- Available in various sizes to suit different needs
- Customizable surface finish and graphics options
- Food-grade cleaning process ensures suitability for food and beverage use
- Lighter than steel cylinders of the same size
- Equipped with robust handles for easy carrying
- High-tech shaping machines ensure smooth cylinder interfaces
- Consistent TARE weight across tanks

Cons:
- Limited information on specific maintenance requirements
- May require periodic hydrostatic testing for continued use
- Handling and storage must adhere to strict safety guidelines

China beer co2 tank regulator Manufacturers Suppliers ...

Product Details: The PERA CO2 regulator is designed for beer brewing and wine making. It features a CGA-320 inlet and includes a safety pressure valve. The regulator is equipped with a low-pressure gauge to monitor the output pressure up to 60 PSI and a high-pressure gauge to monitor the gas remaining in the tank up to 3000 PSI. It has a shut-off valve and an outlet fitting to connect the air line to the keg coupler. The regulator is built with durable materials and is factory leak tested.

Pros:
- Includes a safety pressure valve to prevent over-pressurization
- Durable construction with high-quality materials
- Low and high-pressure gauges for precise monitoring
- Suitable for both homebrewing and commercial use
- Shut-off valve and outlet fitting for easy connection and control

Cons:
- May require periodic replacement of parts due to wear and tear
- No tamper-evident adjustment screw mentioned, which could be a security concern
- Customer support and warranty details may vary

Draft Beer Homebrew Keg Kit with 20oz CO2 Tank - Pin Lock

Product Details: The Draft Beer Homebrew Keg Kit with 20oz CO2 Tank - Pin Lock includes a new single gauge Pin valve CO2 Regulator, a new 20oz CO2 Tank (shipped empty), and a new 4' CO2 Hose with a threaded connection for the disconnect. The kit is designed for homebrewers to set up a basic draft beer system. It also includes other necessary components such as a keg coupler, beer line, and faucet.

Pros:
- Complete kit for setting up a homebrew draft beer system
- Includes a single gauge CO2 regulator for easy pressure management
- 20oz CO2 tank provides sufficient gas for carbonating and dispensing beer
- 4' CO2 hose with threaded connection for secure and easy setup
- Ideal for homebrewers looking for a hassle-free kegging solution

Cons:
- CO2 tank is shipped empty, requiring additional cost to fill
- Limited to pin lock kegs, not compatible with ball lock kegs
- No additional accessories like a kegerator or refrigeration unit included

CO2 FlexHoseTap® For Beer -50580

Product Details: The CO2 FlexHoseTap® For Beer is a product designed for beer dispensing systems. It includes a flexible hose and a tap adapter, specifically tailored for connecting CO2 lines to beer kegs. The product is made to ensure a secure and leak-free connection, facilitating the smooth flow of CO2 to maintain the optimal carbonation of beer.

Pros:
- Flexible hose for easy maneuverability and installation
- Secure and leak-free connection to ensure consistent CO2 flow
- Designed specifically for beer dispensing systems to maintain optimal carbonatio...

Cons:
- Limited information available on the specific materials used or durability
- No mention of compatibility with all types of beer kegs or systems

Comparison Table

Company	Product Details	Pros	Cons	Website
CO2 in China...	China has implemented the world's largest emissions trading system to reduce national greenhouse gas emissions. The system, a tradable performance sta...	- The TPS is expected to contribute significantly to China’s goal of achieving net... - Projected emissions reductions under the TPS could decrease by...	- China’s CO2 emissions increased by 5.2% in 2023, requiring a record fall of 4-6%... - The current growth in emissions, driven by coal-fired power an...	www.homebrewtalk.com
KegLand 2.5 lb CO2 Tank	Premium Aluminum	New	The 25 lb Aluminum CO2 Tank is constructed from high-strength aluminum alloy 6061-T6, making it lighter and rust-proof compared to steel tanks. It mea...	- Lightweight and rust-proof due to high-strength aluminum alloy 6061-T6 construct... - Equipped with a CGA320 valve, CGA approved and compatible with...
Boxing Cat Brewery succeeded in lowering DO levels ...	Boxing Cat Brewery implemented the Haffmans CO2/O2 Gehaltemeter from Pentair to improve their brewing process. The system helps in measuring and contr...	- Substantially lowered DO levels, improving beer quality and stability. - Balanced growth and quality, enabling the brewery to produce the best beer...	- No specific cons mentioned in the case study, but the initial need for a pilot t...	foodandbeverage.pentair.com
Beer in my CO2 tank	CO2 tanks come in various sizes ranging from 2.5 lb to 20 lbs, commonly made from aluminum or steel. Key considerations include portability, efficienc...	- Larger tanks require less frequent refilling, making them more convenient for he... - Properly sized tanks can fit inside most kegerators, ensuring...	- CO2 tanks can be heavy and bulky, especially larger sizes. - There is a risk of the tank overheating and triggering the safety valve, which c... - P...	www.homebrewtalk.com
China Hot Sales Beer Kegerator Two Stage CO2 ...	This China Hot Sales Beer Kegerator features a two-stage CO2 beer regulator. It is designed to hold up to two 1/2 keg barrels, making it suitable for...	- Accommodates up to two 1/2 keg barrels, allowing for multiple beer options. - Durable and easy-to-clean stainless steel interior. - Digital thermost...	- Tower and tapping equipment may not be included and need to be ordered separatel... - Requires a 115V electrical connection for operation. - May hav...	www.bestsuppliers.com
Co2 Canister For Beer	Aluminum CO2 cylinders are designed for the beverage carbonation industry, made from high-strength alloy aluminum 6061-T6. They are manufactured to US...	- Lightweight and corrosion-resistant - Durable and made from high-strength alloy aluminum 6061-T6 - Compliant with US DOT-3AL and TC-3ALM specificati...	- Higher upfront cost for brand new tanks - Refill frequency can be high for smaller tank sizes - Larger tanks can be cumbersome to handle and store -...	www.midstarcylinders.com
China Co2 Bottles Factory and Manufacturers, Suppliers	ZX DOT aluminum CO2 cylinders are designed and produced to meet or exceed DOT-3AL standards. They are made from aluminum alloy 6061-T6, with material...	- Compliant with international standards such as DOT-3AL, ISO 9809-1, ISO 11118, a... - Made from high-quality aluminum alloy 6061-T6 - Available in v...	- Limited information on specific maintenance requirements - May require periodic hydrostatic testing for continued use - Handling and storage must ad...	www.zxhpgas.com
China beer co2 tank regulator Manufacturers Suppliers ...	The PERA CO2 regulator is designed for beer brewing and wine making. It features a CGA-320 inlet and includes a safety pressure valve. The regulator i...	- Includes a safety pressure valve to prevent over-pressurization - Durable construction with high-quality materials - Low and high-pressure gauges fo...	- May require periodic replacement of parts due to wear and tear - No tamper-evident adjustment screw mentioned, which could be a security concern - C...	www.perabar.com
Draft Beer Homebrew Keg Kit with 20oz CO2 Tank - Pin Lock	The Draft Beer Homebrew Keg Kit with 20oz CO2 Tank - Pin Lock includes a new single gauge Pin valve CO2 Regulator, a new 20oz CO2 Tank (shipped empty)...	- Complete kit for setting up a homebrew draft beer system - Includes a single gauge CO2 regulator for easy pressure management - 20oz CO2 tank provid...	- CO2 tank is shipped empty, requiring additional cost to fill - Limited to pin lock kegs, not compatible with ball lock kegs - No additional accessor...	www.kegoutlet.com
CO2 FlexHoseTap® For Beer -50580	The CO2 FlexHoseTap® For Beer is a product designed for beer dispensing systems. It includes a flexible hose and a tap adapter, specifically tailored...	- Flexible hose for easy maneuverability and installation - Secure and leak-free connection to ensure consistent CO2 flow - Designed specifically for...	- Limited information available on the specific materials used or durability - No mention of compatibility with all types of beer kegs or systems	shop-lelandgas-com.3dcartstores.com

Frequently Asked Questions (FAQs)

Frequently Asked Questions About CO2 Tank Beer Factories in China

What is the primary purpose of a CO2 tank in beer brewing and dispensing?

A CO2 tank is essential for maintaining the freshness and carbonation of your beer. It provides a steady supply of CO2 gas that pressurizes the keg, preventing the beer from going flat and ensuring it retains its crisp, effervescent taste.

What materials are CO2 tanks typically made of, and why?

CO2 tanks are often made from high-quality materials such as steel or aluminum alloys, like Aluminum 6061. These materials are chosen for their durability, strength, and lightweight properties, ensuring the tanks are both safe and easy to handle.

What safety standards do CO2 tanks from Chinese manufacturers adhere to?

CO2 tanks from Chinese manufacturers are designed to meet strict safety standards. They undergo hydro-tests before delivery and comply with international standards such as EN, DOT, and ISO. This ensures the tanks are safe for use and meet industry requirements.

How long do CO2 tanks typically last, and when do they need recertification?

CO2 tanks generally have a lifespan of about 15 years. However, they need to be recertified every 5 years to ensure they remain safe and functional. This periodic recertification is crucial for maintaining the integrity of the tank.

What is the typical delivery time for CO2 tanks ordered from Chinese manufacturers?

The delivery time for CO2 tanks ordered from Chinese manufacturers can vary, but it usually ranges from 6 to 30 days after the deposit is made. The tanks are typically shipped empty to ensure safety during transportation.