Are you curious about where to find the best split case centrifugal pumps in China? With numerous factories vying for attention, it can be overwhelming to choose the right one. In this article, we’ll explore the top manufacturers, highlighting their strengths and what sets them apart in the industry.

XS Split Case Pump_Hunan M&W Pump Co., Ltd

Product Details: XS type pump is a new generation of high performance single-stage double-suction centrifugal split pumps, used in various applications including water delivery, air conditioner circulation, heating systems, and industrial water supply.

Pros:
- High performance and efficiency
- Versatile applications in various industries

Cons:
- Limited temperature range (-20℃ to 200℃)
- Potentially high maintenance costs

Split Case Pumps From Manufacturer Supplier China - Shinjo

Product Details: Split Case Pumps made from Stainless Steel or Cast Iron, available in sizes from 1/2-32 Inch (DN100mm-DN800mm), with a flow rate of 72-5500 m3/h and lift head of 10-125 m.

Pros:
- High flow capacity and efficiency.
- Available in various materials and sizes.

Cons:
- Limited to specific applications.
- Potentially higher maintenance due to complexity.

China Split Case Pump Manufacturers, Suppliers, Factory - Split Case ...

Product Details: LQXS split case pump is widely used for water supply & drainage in fields of factories, cities, mines, power stations and farmlands. It delivers clear water without solid particles or other liquids similar to clear water. The temperature of the liquid is 105℃, with a permissible maximum inlet pressure of 0.6MPa. Size ranges from 80-450 mm, flow from 14.5~2500m3/h, head from 6.1~200m, and power from 2.2~1800 kW. Casing materials include Cast Iron, SS304, SS316, and Duplex Stainless Steel. Impeller materials include Cast Iron, SS304, SS316, Duplex Stainless Steel, and Bronze.

Pros:
- High efficiency and energy-saving
- Wide application in various fields

Cons:
- Limited to clear water and similar liquids
- Temperature and pressure limitations

Split case pump, Split casing pump, End suction pump, Multistage pump ...

Split Case Pump, China Split Case Pump Manufacturers, Suppliers ...

Product Details: The split case pump is a centrifugal pump with a casing divided into two separate chambers, designed for maximum efficiency, broad hydraulic coverage, low NPSHr value, and a long design life.

Pros:
- High efficiency and lower noise
- Interchangeable shaft seal options without modification

Cons:
- Limited information on specific applications
- Potential complexity in maintenance due to dual chamber design

Centrifugal split case pump Manufacturer & Supplier in China - Hunan ...

Product Details: Centrifugal split case pump by Hunan Credo Pump Co., Ltd is designed for efficient water movement in various applications, including industrial and commercial use. It features a split casing for easy maintenance and high energy efficiency.

Pros:
- High energy efficiency and durability
- Easy maintenance due to split casing design

Cons:
- Requires regular servicing to ensure optimal performance
- Initial setup may require professional assistance

China Horizontal Split Case Pump Manufacturers, Suppliers, Factory ...

Product Details: YONJOU horizontal split case pumps are designed for delivering clear water without solid particles or other liquids similar to clear water. They are suitable for various applications including power stations, pulp and paper mills, and water desalination plants. The pump operates at a temperature of 105℃ and has a maximum inlet pressure of 0.6MPa. Size ranges from 80-450 mm, flow from 14.5~2500m3/h, head from 6.1~200m, and power from 2.2~1800 kW. Casing materials include Cast Iron, SS304, SS316, and Duplex Stainless Steel, while impeller materials include Cast Iron, SS304, SS316, Duplex Stainless Steel, and Bronze.

Pros:
- Energy savings
- Highest efficiency
- Low pulsation
- Horizontal split casing
- Easy and fast maintenance
- Excellent NPSH values

Cons:
- Limited to clear water applications
- Temperature and pressure limitations

Split Case Pump - An Pump Machinery

Product Details: Double Suction Split Case Pump with large capacity up to 14000 m³/h, driven by electric motor or diesel engine, featuring gland packing or mechanical seal, and available in cast iron/SS304/Bronze impeller.

Pros:
- High performance with large flow rates and pressure.
- Ease of maintenance due to split case design.
- Customizable options available.
- Energy efficient design.

Cons:
- Limited information on specific applications.
- Potentially high initial investment.

Split case pump XSL series (Vertical) - pumpschina.com

Product Details: XSL series vertical installed split case double suction centrifugal pump, single impeller, double-entry, flow: 50 - 20,000 m3/h, delivery head: 7-220m, outlet diameter: 80-1,600mm, liquid temperature: 0℃-80℃.

Pros:
- Wide range of flow and head capabilities
- High efficiency and stable performance
- Easy maintenance with axially split design
- Long service life and quiet operation

Cons:
- Limited to specific liquid temperature range
- Potentially high initial cost for installation

Axial Split Case Centrifugal Pump, China Axially Split Pump Manufacturer

Product Details: NMZ/NMZV pump is a single stage, axial split case, double suction, between bearing centrifugal pump suitable for pumping clean water or slightly contaminated water. It features an axially split casing for easy maintenance and a closed double suction impeller for improved efficiency.

Pros:
- Easy maintenance due to axially split casing design
- High efficiency with closed double suction impeller

Cons:
- Limited to clean or slightly contaminated liquids
- Potentially higher initial cost compared to simpler pump designs

Related Video

Comparison Table

Frequently Asked Questions (FAQs)

What is a split case centrifugal pump?

A split case centrifugal pump is a type of pump designed for high flow and pressure applications. It features a two-part casing that allows for easy maintenance and inspection. This design helps in reducing vibration and noise, making it ideal for various industrial applications.

Why are split case centrifugal pumps popular in China?

China has a robust manufacturing sector, and split case centrifugal pumps are favored for their efficiency and reliability. They are widely used in water supply, irrigation, and industrial processes, making them essential in many Chinese factories.

What should I consider when choosing a pump factory in China?

When selecting a pump factory, consider their experience, production capacity, quality control processes, and customer reviews. It's also important to check if they offer customization options and after-sales support to ensure you get the best product for your needs.

How can I ensure the quality of pumps from Chinese factories?

To ensure quality, request certifications like ISO or CE, and ask for product samples before placing a large order. Visiting the factory or working with a local agent can also help you assess their manufacturing processes and quality standards.

What are the typical lead times for split case centrifugal pumps from China?

Lead times can vary based on the factory and order size, but typically, you can expect around 4 to 12 weeks for production. It's best to communicate your timeline with the factory to ensure they can meet your delivery needs.